Buy Lian Li LANCOOL 215 Gaming Black Case in Pakistan
Lian Li LANCOOL 215 Gaming Case
LANCOOL 215 features two pre-installed 200MM RGB fans and a 120MM fan, combining with mesh panels, honeycomb vents enable efficient ventilation.
OPTIMIZED THERMAL MANAGEMENT
MESH INTAKES SPANNING THE FRONT PANEL GUARANTEE
SUFFICIENT AIRFLOW IN AND OUT OF THE SYSTEM.
Pre-installed fans ensure the case runs at peak performance.
The honeycomb vent design at the top, rear, and above the PSU chamber guarantee an abundant airflow is delivered to the interior components, optimizing the thermal management.
Supports a maximum of 7 fans and radiators
in various sizes and configurations. You make the call!
|3 x 120MM fans
2 x 140MM fans
280MM radiator with max 70MM thick
360MM radiator with max 70MM thick
|Top Panel||2 x 120MM fans
2 x 140MM fans
240MM radiator with max 55MM thick
280MM radiator with max 55MM thick
(on top of the PSU shroud)
|2 x 120MM fans|
ULTIMATE COOLING SYSTEM SCENARIO
With two 200MM fans mounted outside of the frame,you still have enough room
to front mount a 360 AIO radiator to benefit from the ultimate cooling scenario.
Don’t worry about the fan screws, they won’t interfere with the radiator.
MOVE AIR STYLISHLY WITH ARGB EFFECTS
Two 200MM fans are equipped with LED lights
which creates a dazzling effect through the mesh panel.
The LED button located on the top controls 8 lighting modes
and 7 colors through a simple click.
The LIAN LI logo glows in sync with the fans
WITH THE MOTHERBOARD
Pressing the LED button 3 seconds passes over the control of the LED lights
to the motherboard, and press the button 3 seconds again to regain control of the lights.
EFFORTLESS CABLE MANAGEMENT
PLENTY OF SPACE FOR CABLE MANAGEMENT
The 22MM thick space behind the motherboard ensures the cables fit in well.
PRE-INSTALLED FAN HUB
The included fan hub can provide extra power to 3 additional fans and 1 extra ARGB device.
KEEP THE CABLE NICE AND NEAT
The rubber grommets around the motherboard and the cable tie points
at the back of the motherboard tray, with included Velcro straps,
simplify cable management.
STORAGE & MOTHERBOARD SUPPORT
ROOM FOR 4 STORAGE DRIVES
REMOVABLE/ADJUSTABLE CAGE SUPPORTS
2 X 3.5” HDD OR 1 X 3.5” HDD + 1 X 2.5” SSD
2 X SSD SUPPORT BEHIND THE MOTHERBOARD
E-ATX MOTHERBOARD COMPATIBLE
Fits motherboards with a maximum width of 280MM.
SIMPLE DUST MANAGEMENT
The trendy mesh design at the front panel
provides filtration for dust coming from outside the chassis.
Moreover, the magnetic dust filter on the top
and the removable full-length dust tray
at the bottom protect the internal components
from dust accumulation without impeding the airflow.
LANCOOL II-1X Vertical GPU Kit
Want to show your graphics card?
Lancool II-1x is a perfect fit for the LANCOOL 215.
LANCOOL II-2X Side Diffused ARGB LEDs Strip
Not enough RGB?
Stick the LANCOOL II-2X at the top edge
of your PSU shroud.
|Dimensions||(D) 462mm x (W) 215mm x (H) 482mm|
|Motherboard||E-ATX(width: under 280mm)/ATX/M-ATX/ITX|
4.0mm tempered glass (both sides)
|Incl Fans||2 x 200MM 3-PIN 800 RPM ARGB fans (front)
1 X 120MM 3-PIN 1100 RPM Fans (rear)
|Fan Support||Front: 2 x 140mm or 3 x 120mm
Top: 2 x 120mm or 2 x 140mm
Top of PSU chamber: 2 x 120mm
|Radiator||Front: 1 x 280/360mm
Top: 1 x 240 / 280 mm
|Drive||Behind MB Tray: 2 x 2.5″ SSD
Hard Drive Cage: 2 x 3.5″ HDD or 1 x 2.5″ SSD
|I/O Ports||Power button
LED button for lighting mode control
1 x HD AUDIO
2 x USB 3.0
|Dust Filters||1 x Top (magnetic), 1 x Bottom (tray)|
“TechMathced offers a price-beating policy for its customers. If you find anyone selling at less price than us, you can contact us, and we’ll beat the price for you.
Read here in detail about Price-Match Policy.”